The plaster machine station SHS--4/6 it is applied to reception of a commodity solution, its finishing up to a necessary working consistence, filtering and submission to plasterer workplaces for drawing on plastered surfaces, filling floors and drawing on vertical plastered surfaces by injectors.
The station represents the warmed van in which the reception bunker, elevating wheel with the mechanism of rotation, a water tank with the centrifugal pump, mortar pump, the bunker with vibrocleaner, system of heating, an electric equipment are located.
The station is applied on the open areas of units of industrial, civil and farm construction provided by the electric power and water.
Climatic modification V category I in accordance with GOST 15150 at an ambient temperature from a minus 30°С up to plus 40°С. At negative temperature of external air by the consumer should be provided reliable heat insulation of mortar (concrete) wire and systems of water supply.
Indicator | Units | Value |
Productivity depending on mortar pump |
m3 | 4-6 |
Volume of the reception bunker | m3 | 2.5 |
Capacity of the electric motor drive of elevating wheels | kW | 7,5 |
Capacity TEN’s (a tank with water) | kW | 15 |
The general power consumption | kW | 29,4 |
Rotation frequency of elevating wheel | rev/min | 15 |
Volume ready at preparation of a solution | liter | to 200 |
Indicator | Units | Value |
Length | mm. | 4 550 |
Width | mm. | 2 500 |
Height | mm. | 2 200 |
Weight* | kg. | 3 150 |
The name | Units | СО-49S | СО-49PA | СО-49P2 | СО-50D | СО-50DM | СО-49D |
Productivity | m3/hour | 3,0 | 4,0 | 3,0/4,0 | 6,0 | 6,0 | 4,0 |
Solution clipper | ОR-50 | ||||||
− Dу | mm. | - | 50 | - | - | - | - |
− pressure (max) | MPa. | - | 4,5 | - | - | - | - |
Ball stopcock: | |||||||
− Dу | mm. | 38 | 38 | 38 | 38 | 38 | |
− pressure (max) | MPa. | 4,0 | 4,0 | 2,5 | 2,5 | 1,6-2,5 | |
Working presure (max) | kgs/sm2 | 35 | 35 | 30 | 25 | 25 | 15 |
Submission distance of a solution: | |||||||
– across horizontal, no more | m. | 250 | 300 | 250 | 250 | 250 | 160 |
– across vertical, no more | m. | 100 | 120 | 80 | 60 | 60 | 35 |
Piston motion | mm. | 90 | 120 | 90 | - | - | - |
Plug motion | mm. | - | - | - | 120 | 120 | 90 |
Cylinder sleeve lenght | mm. | 188 | 220 | 188 | - | - | - |
Piston diameter | mm. | 100 | 100 | 100 | - | - | - |
Plug diameter | mm. | - | - | - | 110 | 110 | 90 |
The hatch for replacement of the ball | - | + | - | - | - | - | |
Oil crankcase of gear pair | - | - | - | - | + | - | |
Rubber-covered ball, diameter | mm. | 50 & 70 | 50 & 70 | 50 & 70 | 70 & 70 | 70 & 70 | 60 & 60 |